Both of these extension cables have worked for me. (mod feel free to change these to affiliate links to get paid)
Do not use the usb C to A adapter with the second one.
https://www.amazon.com/gp/product/B09YTVVDGJ/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
https://www.amazon.com/gp/product/B09FLQ545S/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
The values above are used in firmware for the original (rigid) prototype boards.
The early cardboard and current vinyl LE foldable boards had two markers moved because of the folds/cuts:
+0.375, -0.122, becomes +0.375, -0.118,
+0.375, +0.125, becomes +0.375, +0.119,
If you put the LE board with the T5 logo in the lower right corner, these two markers are near the folds on the right-hand edge.
@Isomorph - this: https://www.amazon.com/dp/B077VRWZPK
works for me with LE Kit glasses with T5 cable, also works with T5 cable plus and a passive 6ft extender: https://www.amazon.com/dp/B08P3BCDHL
and also works with an otherwise awful active & powered 30ft extender: https://www.amazon.com/dp/B08TBD9F3L
Win10, Dell T7500, so not exactly recent motherboard/BIOS. Fresco Logic chipset and driver, needed reboot to get rid of bogus "can be faster" warnings.
Cool, glad to hear it's coming at some point. I could imagine it would be a lot of work to support any arbitrary orientation, but hopefully it's not too hard to also support a straight vertical option since I think there's a lot of interesting use cases in that orientation.
Great question! You nailed it, the channel was a request from folks looking to hack on the hardware, or people who want to dive deep into the glasses/wand hardware. We've seen interesting experiments using Tilt Five with Ultrahaptics sensors, 3D printed mounts, wand accessories, custom gameboards, so we'd love to see any conversations that come out of this channel
Looks like your connection to Tilt Five Forums was lost, please wait while we try to reconnect.
